Downstream O2 Sensors Swapped Bank To Bank

Description:

How does a P0041 code trigger the check engine light? This code will trigger the light to come on under the following condition:

The Heated Oxygen Sensor Monitor, a strategy built into the computer, determines if the Heated Oxygen Sensor (HO2S) signal response for a change in fuel trim corresponds to the correct engine bank. If a response from the Oxygen Sensor being tested is not indicated, a trouble code will be set and the MIL (Malfunction Indicator Lamp) will illuminate.

Possible Causes:

Crossed Heated Oxygen Sensor harness connectors
Wiring swapped from one Oxygen Sensor connector to the other
Wiring changed at the computer connection or in the related harness

Diagnostic Help:

This check engine light code is caused by swapped wiring or connectors of the downstream Heated Oxygen Sensors. This would have to be the result of a previous repair, so be sure to check the vehicle history. You may also use the “Get Help” link if you need specifications or have any other related questions. Remember to refer to an appropriate manual for specific instructions.

Downstream O2 Sensors Swapped Bank To Bank

Description:

How does a P0041 code trigger the check engine light? This code will trigger the light to come on under the following condition:

The Heated Oxygen Sensor Monitor, a strategy built into the computer, determines if the Heated Oxygen Sensor (HO2S) signal response for a change in fuel trim corresponds to the correct engine bank. If a response from the Oxygen Sensor being tested is not indicated, a trouble code will be set and the MIL (Malfunction Indicator Lamp) will illuminate.

Possible Causes:

Crossed Heated Oxygen Sensor harness connectors
Wiring swapped from one Oxygen Sensor connector to the other
Wiring changed at the computer connection or in the related harness

Diagnostic Help:

This check engine light code is caused by swapped wiring or connectors of the downstream Heated Oxygen Sensors. This would have to be the result of a previous repair, so be sure to check the vehicle history. You may also use the “Get Help” link if you need specifications or have any other related questions. Remember to refer to an appropriate manual for specific instructions.

Upstream O2 Sensors Swapped Bank To Bank

Description:

How does a P0040 code trigger the check engine light? This code will trigger the light to come on under the following condition:

The Heated Oxygen Sensor Monitor, a strategy built into the computer, determines if the Heated Oxygen Sensor (HO2S) signal response for a change in fuel trim corresponds to the correct engine bank. If a response from the Oxygen Sensor being tested is not indicated, a trouble code will be set and the MIL (Malfunction Indicator Lamp) will illuminate.

Possible Causes:

Crossed Heated Oxygen Sensor harness connectors
Wiring swapped from one Oxygen Sensor connector to the other
Wiring changed at the computer connection or in the related harness

Diagnostic Help:

This check engine light code is caused by swapped wiring or connectors of the upstream Heated Oxygen Sensors. This would have to be the result of a previous repair, so be sure to check the vehicle history. You may also use the “Get Help” link if you need specifications or have any other related questions. Remember to refer to an appropriate manual for specific instructions.

Recent Comments
  • RESET ENGINE OIL LIFE CADILLAC CT6 ON 2014-2017
    How to reset oil life for Cadillac CT6 from years 2016, 2017 To turning off the Oil Life Light on 2016, 2017 Cadillac CT6, conform to the following instructions: Press SEL button on the steering wheel Scroll to Info Pages and press SEL button Hit the Up/Down button until you see the “OIL LIFE REMAININGâ€� […]
  • RESET ENGINE OIL LIFE HYUNDAI VELOSTER ON 2014-2017
    How to reset oil life for Hyundai Veloster from years 2014, 2015, 2016, 2017 To turning off the Oil Life Light on 2014, 2015, 2016, 2017 Hyundai Veloster, conform to the following instructions: Turn the ignition to position On without starting the engine. Press and hold the TRIP button until you enter to “User Settingâ€� […]
  • RESETTING OIL CHANGE WARNING LIGHT FOR DACIA DUSTER 2009-2015
    How to reset oil change warning light for Dacia Duster from years 2009, 2010, 2011, 2012, 2013, 2014, 2015 To turning off the Oil Life Light on 2009, 2010, 2011, 2012, 2013, 2014, 2015 Dacia Duster, conform to the following instructions: Turn the ignition key to position “ONâ€� fully depress accelerator pedal and then depress […]
  • Service light reset dashboard BMW X5 and BMW X6
    How do you reset maintenance light, reset service light indicator BMW X5 and BMW X6, year 2000-2013. For reset maintenance light and that can be made manually by use button on car dashboard. Reset oil service light, engine oil life BMW X5 and BMW X6, year 2000-2013 oil reset instructions: Turn the ignition to the […]
  • Service light reset dashboard BMW with 20 pin connector
    How do you reset maintenance light, reset service light BMW with 20 pin connector. For reset maintenance light and that can be made manually by use button on car dashboard. Reset service light, engine oil life BMW with 20 pin connector, oil reset instructions: How to reset oil maintenance light on BMW with 20 pin […]