Check Engine Light Code P0302

Misfire Detection Monitor – Cylinder 2 Misfire

Description:

How does a P0302 code trigger the check engine light? This code will trigger the check engine light as follows:

The misfire detection monitor, a software strategy built into the computer, is designed to detect an engine misfire. The computer can also normally identify the specific cylinder in which the misfire has occurred. A misfire is nothing more than a lack of combustion, which can be caused by poor fuel quality or metering, low compression, lack of spark or unmetered air entering the engine. There are other possible, less obvious causes as well, such as uncommanded Exhaust Gas Recirculatin (EGR), flow. When the misfire monitor detects a misfire, it will trigger the check engine light with the specific cylinder number as the last digit in the P030X code. For instance cylinder 1 misfire is P0301, cylinder 2 is P0302 etc.

Possible Causes:

Fuel injectors, related wiring, sensors and computer issues
Running out of gas, or poor fuel quality
Evaporative emissions system (EVAP) concerns: fuel vapors leaking into engine
Incorrect Fuel Pressure
EGR system concerns: leaking EGR valve or restricted ports
Base engine concerns: low compression, valve train problems and timing issues
Ignition system concerns including, but not limited to:
Faulty spark plugs
Faulty coil or related wiring
Ignition module or related wiring issues
Ignition related sensor faults or wiring issues

Diagnostic Help:

Begin by checking for proper fuel and ignition system operation, and then follow up with the less likely causes listed above, such as EGR and EVAP system problems. New style coil on plug applications have a high failure rate, and can be concluded faulty by swapping to another cylinder and checking to see if the misfire moves to that cylinder. This is a quick check if a capable scan tool or oscilloscope is not available. Always make sure the basic maintenance is done first and that things such as the fuel filter, air filter, spark plugs and spark plug wires are in good working order, as these are all possible candidates for a problem. If necessary, check for wiring and component concerns. See our article “Automotive Circuit Testing 101”, if you need more assistance with this. If concern is determined to be intermittent, check out our article on intermittent diagnosis and wiggle test connectors and wiring, attempting to duplicate concern. You may also use the “Get Help” link if you need specifications or have any other related questions. Remember to refer to an appropriate manual for specific instruction.

Leave a Reply

Your email address will not be published. Required fields are marked *

 

Recent Comments
  • RESET ENGINE OIL LIFE CADILLAC CT6 ON 2014-2017
    How to reset oil life for Cadillac CT6 from years 2016, 2017 To turning off the Oil Life Light on 2016, 2017 Cadillac CT6, conform to the following instructions: Press SEL button on the steering wheel Scroll to Info Pages and press SEL button Hit the Up/Down button until you see the “OIL LIFE REMAINING” […]
  • RESET ENGINE OIL LIFE HYUNDAI VELOSTER ON 2014-2017
    How to reset oil life for Hyundai Veloster from years 2014, 2015, 2016, 2017 To turning off the Oil Life Light on 2014, 2015, 2016, 2017 Hyundai Veloster, conform to the following instructions: Turn the ignition to position On without starting the engine. Press and hold the TRIP button until you enter to “User Setting” […]
  • RESETTING OIL CHANGE WARNING LIGHT FOR DACIA DUSTER 2009-2015
    How to reset oil change warning light for Dacia Duster from years 2009, 2010, 2011, 2012, 2013, 2014, 2015 To turning off the Oil Life Light on 2009, 2010, 2011, 2012, 2013, 2014, 2015 Dacia Duster, conform to the following instructions: Turn the ignition key to position “ON” fully depress accelerator pedal and then depress […]
  • Service light reset dashboard BMW X5 and BMW X6
    How do you reset maintenance light, reset service light indicator BMW X5 and BMW X6, year 2000-2013. For reset maintenance light and that can be made manually by use button on car dashboard. Reset oil service light, engine oil life BMW X5 and BMW X6, year 2000-2013 oil reset instructions: Turn the ignition to the […]
  • Service light reset dashboard BMW with 20 pin connector
    How do you reset maintenance light, reset service light BMW with 20 pin connector. For reset maintenance light and that can be made manually by use button on car dashboard. Reset service light, engine oil life BMW with 20 pin connector, oil reset instructions: How to reset oil maintenance light on BMW with 20 pin […]